Skip to the content
No.16 from the front three-quarter: grey frame and mesh back, olive fabric seat, black arm pads, grey base

Picture 1 / 6

Task chairs

No.16

Mid-back mesh task chair with asymmetric lumbar

No.16 is a mid-back mesh task chair with automotive-inspired lines, lumbar support that adjusts separately on each side, adjustable arm pads and a choice of two mechanisms.

₹15,105MRP ₹25,17540% off

Inclusive of 18% GST

Frame

Black

Configuration

This configuration

Frame
Black
Mechanism
Synchronised tilt
Tilt lock
Upright position
Armrests
1D height adjustable
Base
Black nylon
1

  • GST invoice

    Add your GSTIN at checkout to claim the input credit.

  • Delivery and installation

    Shown at checkout for your pincode, before you pay.

  • Warranty

    Against manufacturing defects, as set out on our warranty page.

  • Secure payment

    Cards, UPI and net banking, through Razorpay.

Buying for a team or an office? Ask for a bulk quote

Overview

Car-inspired lines, with lumbar support you can tune on each side.

No.16 is a medium-back workstation chair with automotive-inspired styling: a thin, flat back frame and angular details repeated across every part. Its lumbar support is asymmetrical, with each side adjusting separately for height and pressure, and the arm pads adjust too, so the chair can be fitted to people of different builds. Choose a synchronised tilt that locks upright, with 1D height-adjustable arms, or a weight-activated mechanism with multi-point locking and 3D arms. Every version has adjustable tilt tension, pneumatic seat height, a 360-degree swivel, a mesh back, a fabric seat and a five-star nylon base.

Ideal for

  • Open-plan workstations
  • Teams with a range of builds
  • Long days at a desk
  • Contemporary office interiors
Open-plan office with grey-framed No.16 chairs in orange fabric at timber-topped desks with grey screens

At a glance

  • 01

    Asymmetrical lumbar

    Each side adjusts on its own for height and pressure.

  • 02

    Height-adjustable arms

    Polyurethane arm pads on 1D or 3D arms, depending on the mechanism.

  • 03

    Choice of mechanism

    Synchronised tilt that locks upright, or weight-activated with multi-point locking.

  • 04

    Adjustable tilt tension

    Set how firmly the back resists as you lean back.

  • 05

    Thin, flat back frame

    Automotive-inspired styling with angular details throughout.

  • 06

    360-degree swivel

    Turns all the way round, with pneumatic seat height adjustment.

No.16 from the front three-quarter: grey frame and mesh back, olive fabric seat, black arm pads, grey base

01

Styling taken from the car

No.16 takes its cue from automotive styling. The back frame is thin and flat, and an angular theme runs through every component, from the frame to the arm pads, giving the chair chiselled, refined lines that suit a contemporary office. The form is streamlined rather than busy, with less clutter to look at and less complexity to work out. The frame comes in black or grey with a nylon base to match, and frame, mesh and upholstery colours can be customised.

A man seated in No.16 at a desk with yellow-green screens, the mesh back facing the camera

02

Fitted to the person in the chair

People come in different builds, and No.16 is made to adjust to them. Its lumbar support is asymmetrical: the left and right sides are set independently, each for height and for pressure, so the support can be tailored to your back. The arm pads adjust as well, and the tilt tension can be set to suit you. The aim is a good posture you can hold while staying relaxed, on a chair that has been set up for you rather than for an average user.

Features

  • A man reaching behind him to set the lumbar controls on both sides of the No.16 back at his desk

    Asymmetrical lumbar support

    The lumbar support adjusts independently on each side of the back. The left and right can each be fine-tuned for height and for pressure, so the support is shaped to you rather than fixed at a single setting. It is how the chair accommodates people of varied builds, helping each of them find a good posture and stay relaxed through the working day.

  • Height-adjustable arm pads

    Height-adjustable arm pads

    The polyurethane arm pads adjust to suit the person sitting, so the forearms are supported as you work. Configurations with the synchronised tilt have 1D height-adjustable arms, and those with the weight-activated mechanism have 3D height-adjustable arms. The pads share the angular lines of the frame, part of the design theme that runs through the whole chair.

  • Two mechanisms to choose from

    No.16 comes with a choice of mechanism. The synchronised tilt locks in the upright position. The weight-activated mechanism responds to the sitter's weight and locks at multiple points through the recline, so the back can be held steady at more than one angle. Both have adjustable tilt tension, so the resistance as you lean back can be set to suit you.

  • Controls that keep you on task

    The controls are designed to be intuitive, so adjusting the chair does not pull your attention away from the work. The seat height is set pneumatically, the chair swivels through a full 360 degrees, and the streamlined design keeps the mechanism uncluttered and easy to use. Set it up once, then let the chair support you while you concentrate.

Specifications

Type
Workstation task chair
Back height
Medium back
Swivel
360 degrees

Backrest
Mesh on a thin, flat frame
Lumbar support
Asymmetrical; each side adjusts for height and pressure
Frame colour
Black or grey, by configuration

Care and warranty

Care

  • Vacuum the mesh back and fabric seat now and then with a soft brush attachment.
  • Blot spills on the seat at once with a clean, dry cloth rather than rubbing them in.
  • Wipe the frame, arm pads and base with a soft cloth dampened with mild soapy water, then dry.
  • Avoid bleach, solvents and abrasive cleaners on the mesh, fabric and plastic parts.

Warranty and returns

How warranty, returns, delivery and installation work for every chair we supply.

Questions

Something we have not covered? Ask us about finishes, quantities, delivery or a quote for your space.

How does the lumbar support adjust?

Each side of the lumbar support adjusts on its own, for height and for pressure, so the left and right can be set differently to suit your back.

What is the difference between the configurations?

The synchronised-tilt versions lock in the upright position and have 1D height-adjustable arms, with a black or grey frame. The weight-activated version locks at multiple points and has 3D height-adjustable arms, with a black frame. All have adjustable tilt tension and a fabric seat.

What colours does it come in?

The frame comes in black or grey, each with a five-star nylon base to match. Frame, mesh and upholstery colours can also be customised.

What is the chair made of?

The back is mesh on a thin, flat frame, the seat is upholstered in fabric, the arm pads are polyurethane and the five-star base is nylon.

Does the chair swivel and adjust for height?

Yes. It swivels through 360 degrees, and the seat height adjusts pneumatically.

You may also like

  • Task chairs

    Quip

    Medium-back mesh task chair

    • Frame: Black
    3 options

    ₹13,539MRP ₹22,565

  • Task chairs

    Certo

    Medium-back mesh task chair

    • Back: Black mesh
    • Back: Grey mesh
    2 options

    ₹10,981MRP ₹18,302

  • 40% off

    Task chairs

    Nero

    Task chair with a flexible, edgeless back

    ₹9,942MRP ₹16,570

All task chairs

Goes well with

  • Executive chairs

    Fluence High Back

    Executive high-back chair with adjustable lumbar

    • Frame: Grey
    • Frame: Black
    4 options

    ₹26,168MRP ₹43,613

  • 40% off

    Side and café chairs

    Limber Café

    Stackable café chair with a pivoting mesh back

    ₹22,559MRP ₹37,598

All chairs