Skip to the content
Verta High Back in black with black mesh, headrest and seat on a black nylon base, rear three-quarter view

Picture 1 / 11

Executive chairs

Verta High Back

Executive mesh chair with an adjustable headrest

Verta High Back is the executive and meeting-room version of the V-shaped Verta chair, with a headrest that adjusts in height and angle, adjustable lumbar support, 4D armrests and a weight-activated mechanism.

₹41,751MRP ₹69,58540% off

Inclusive of 18% GST

Configuration

This configuration

Frame
Black
Back
Black mesh
Seat
Pitch Black fabric
Base
Black nylon
1

  • GST invoice

    Add your GSTIN at checkout to claim the input credit.

  • Delivery and installation

    Shown at checkout for your pincode, before you pay.

  • Warranty

    Against manufacturing defects, as set out on our warranty page.

  • Secure payment

    Cards, UPI and net banking, through Razorpay.

Buying for a team or an office? Ask for a bulk quote

Overview

Verta's V-shaped back, taken higher and topped with an adjustable headrest.

Verta High Back takes the V-shaped Verta and gives it a high back and a headrest, for the executive cabin and the meeting room. The V-frame behind the mesh lets the chair be strong yet flexible, and the back and seat are contoured to support a wide range of body shapes. The headrest adjusts in height and angle, the lumbar support adjusts, and the moulded PU foam seat slides for depth. Beneath it is a weight-activated mechanism, with 4D armrests either side. It comes in black throughout, on a polished aluminium or black nylon base.

Ideal for

  • Executive cabins
  • Meeting rooms
  • Presentations and video calls
  • Long working hours
Verta High Back with a light frame and white seat beside a wood desk in a bright executive cabin with a city view

At a glance

  • 01

    V-frame back support

    A V-shaped frame behind the mesh gives the chair both strength and flexibility.

  • 02

    Adjustable headrest

    Moves in height and angle to keep the head and neck in line.

  • 03

    Adjustable lumbar support

    Lower-back support you set to suit your own back, not a fixed point.

  • 04

    Weight-activated mechanism

    Responds to the weight of the person sitting, with a 50 mm seat slide.

  • 05

    4D armrests

    Height, width, depth and pivot, with black polyurethane arm pads.

  • 06

    Choice of base

    Polished aluminium or black nylon beneath an all-black chair.

Back view of Verta High Back showing the black V-frame, mesh back and headrest above a white seat

01

The V at its back

Seen from behind, the chair explains itself. A V-shaped support climbs the back of the frame and holds the mesh, and that single shape is what gives Verta its mix of strength and flexibility. On the high back the mesh carries on upwards, and the headrest sits above it on its own stem, made like the back as mesh held in a frame. Arms, arm tubes and pads are all black, so the outline stays clean and quiet from any side of the room.

For the cabin and the meeting room

02

For the cabin and the meeting room

Verta High Back is the member of the family meant for executive cabins and meeting rooms. It is designed to adapt to the work in front of it, from presenting to a room to a team discussion around the table or a video call with colleagues elsewhere. Behind a desk, the taller back and headrest give it a settled presence; at a shared table, its clean lines keep it calm alongside the furniture around it.

Verta High Back in black on a black nylon base, front three-quarter view in a room with a grey concrete wall

03

Curves that spread the load

Neither the back nor the seat is flat. Both are contoured, shaped with Asian body proportions in mind, and their curves spread pressure so the chair can support many different body shapes and help reduce fatigue. The seat is moulded PU foam covered in Pitch Black fabric, with 50 mm of depth adjustment. Behind you, the lumbar support can be set to suit your lower back, and the headrest raised and tilted to meet your head.

Features

  • Close-up of a light grey Verta headrest tilting through its range of angles

    Adjustable headrest

    The headrest rides on its own stem above the backrest and adjusts in two ways: it slides up or down to meet your head, and it tilts to the angle you find comfortable. Set well, it holds the head and neck in line, which supports good posture and helps reduce fatigue through long working hours. Like the back, it is mesh held in a frame.

  • Adjustable lumbar support

    Adjustable lumbar support

    The lumbar support is built into the black backrest frame and can be adjusted, so the support for your lower back is set to suit you rather than fixed in place. From behind you can see it sitting just inside the V. It works with the contoured back and seat, which are shaped to distribute pressure and suit a wide range of body shapes.

  • Close-up of the black mechanism and its levers beneath the seat

    Weight-activated mechanism

    Beneath the seat sits a weight-activated mechanism, which responds to the weight of whoever is sitting in it. The same mechanism carries the seat depth adjustment: a standard 50 mm of travel that moves the seat forward or back, bringing its front edge nearer to or further from the backs of your knees. Its controls sit just under the seat.

  • 4D armrests

    Each armrest adjusts four ways. It rises and falls, moves in towards the seat or out from it, slides forward and back, and pivots. Together these let you bring the arm pads under your forearms at the desk, or set them lower and wider at the meeting table. The pads are black polyurethane, on black arm tubes that match the frame.

Specifications

Cushion
Moulded PU foam
Upholstery
Pitch Black fabric (BF08)
Depth adjustment
Standard, 50 mm

Height
High back with headrest
Construction
Black mesh on a black frame, with V-frame back support
Lumbar support
Adjustable
Headrest
Black frame and mesh, adjustable in height and angle

Care and warranty

Care

  • Vacuum the mesh back, headrest and fabric seat now and then with a soft brush attachment.
  • Blot spills on the seat fabric straight away with a clean, dry cloth; do not rub.
  • Wipe the frame, arms and a nylon base with a damp cloth; avoid solvents and abrasive cleaners.
  • Dust a polished aluminium base with a soft, dry cloth to keep its shine.
  • Keep the chair out of strong, direct sunlight to protect the finish.

Warranty and returns

How warranty, returns, delivery and installation work for every chair we supply.

Questions

Something we have not covered? Ask us about finishes, quantities, delivery or a quote for your space.

Can the headrest be adjusted?

Yes. It moves up and down and tilts, so you can set it to support your head and neck. Like the back, it is black mesh in a black frame.

Is there a version without a headrest?

Yes. Verta Mid Back has the same V-shaped back frame at medium height, without a headrest.

How does the mechanism work?

It is weight-activated, so it responds to the weight of the person sitting. It also includes a standard 50 mm seat depth adjustment, so the seat can be moved forward or back.

Which finishes can I choose?

Verta High Back is all black: a black frame, black mesh back and headrest, a Pitch Black fabric seat and black arms with polyurethane pads. You choose the base, polished aluminium or black nylon.

Where does it work best?

It was conceived as the executive and meeting-room version of Verta, so it is at home behind a desk in a cabin and around a meeting table, for presentations, team meetings and video calls.

You may also like

All executive chairs

Goes well with

  • 40% off

    Task chairs

    Nero

    Task chair with a flexible, edgeless back

    ₹9,942MRP ₹16,570

  • 40% off

    Side and café chairs

    Limber Café

    Stackable café chair with a pivoting mesh back

    ₹22,559MRP ₹37,598

  • Training chairs

    Moven

    Training chair with an optional writing tablet

    2 options

    ₹14,872MRP ₹24,786

All chairs